我們都知道，自動攪拌車實際上本身具備多種系統，分別發揮著不同其有效的作用，才能讓攪拌車順利工作，下面來講講自動攪拌車操作系統與電器系統。

As we all know, the automatic mixer truck actually has a variety of systems, which play different effective roles in order to make the mixer truck work smoothly. Now let's talk about the operating system and electrical system of the automatic mixer truck.

操作系統

operating system

自動攪拌車操作系統由控制器、聯動軸、軟軸及連桿機構組成,主要控制攪拌筒的轉速及旋轉方向。自動攪拌車后部兩側各布置一套控制器，左右控制器可以實現聯動，控制器上只有一根操縱桿，接出端分別通過連桿機構連接到變量泵上，通過改變泵上控制柄的角度來調節油泵的流量，從而實現控制筒體轉動的方向和速度，通過左右移動手柄來控制；該手柄同時還端通過軟軸連到發動機的油門上，在需要加大轉速時可上下移動來操縱手柄，控制此操縱桿來實現筒體轉速的提高。

The operating system of the automatic mixer consists of a controller, a linkage shaft, a flexible shaft and a linkage mechanism, which mainly controls the speed and direction of rotation of the mixing drum. A set of controllers are arranged at both sides of the rear of the automatic mixer truck. The left and right controllers can realize linkage. There is only one joystick on the controller. The outlet end is connected to the variable displacement pump through the linkage mechanism. The flow of the oil pump is adjusted by changing the angle of the control handle on the pump, so as to control the direction and speed of cylinder rotation, which is controlled by moving the handle left and right; At the same time, the handle is also connected to the accelerator of the engine through a flexible shaft. When the speed needs to be increased, it can be moved up and down to control the handle, so as to increase the cylinder speed.

電器系統

Electrical system

自動攪拌車的電器系統由三部分組成：冷卻風扇控制部分和后示廓燈部分。冷卻風扇控制部分：冷卻風扇的起停由溫度開關自動控制，溫度高于65℃時風扇啟動，低于60℃時風扇停止。溫度開關位于冷卻器上，繼電器與保險片在蓄電池旁電源繼電器盒內。后示廓燈部分：后示廓燈用于夜間表示車后部輪廓大小，與后牌照燈同時點亮與熄滅。

The electrical system of the automatic mixer consists of three parts: the cooling fan control part and the rear position lamp part. Cooling fan control part: the start and stop of the cooling fan is automatically controlled by the temperature switch. The fan starts when the temperature is higher than 65 ℃ and stops when the temperature is lower than 60 ℃. The temperature switch is located on the cooler, and the relay and fuse are located in the power relay box beside the battery. Rear position lamp: the rear position lamp is used to indicate the size of the rear contour at night, and it is turned on and off at the same time as the rear license plate lamp.

有關于自動攪拌車操作系統與電器系統的了解這方面的內容就講解到這里了，您對此有什么問題要咨詢可以隨時來我們網站http://www.gifcare.com了解！

That's all for understanding the operating system and electrical system of the automatic mixer truck. If you have any questions, you can come to our website at any time http://www.gifcare.com Understand!