自動上料攪拌車作業時要注意的事情其實有很多，只有多考慮做正確的操作，才能使用的順利，讓施工質量得到有效提升，下面來講講在自動上料攪拌車作業時注意什么。

There are many things to pay attention to during the operation of the automatic feeding mixer. Only by considering the correct operation, can it be used smoothly and effectively improve the construction quality. Now let's talk about what to pay attention to during the operation of the automatic feeding mixer.

在自動上料攪拌車作業時，腳板應和制動踏板分離開，平放到駕駛室地板上，決不能踩在制動踏板上。自動上料攪拌車常常在凹凸不平的工地作業，如果腳總是踩在制動踏板上，機身上下竄動會造成駕駛員不輕意地踩制動踏板。一般情況下，要用控制油門減速的辦法控制機況和換擋。這樣既避免了頻繁制動造成制動系統過熱，又為自動上料攪拌車快捷的提速帶來方便。

During the operation of the automatic feeding mixer, the foot plate shall be separated from the brake pedal and placed flat on the cab floor. Never step on the brake pedal. The automatic feeding mixer often works on uneven construction sites. If the foot always steps on the brake pedal, the body will move up and down, causing the driver to step on the brake pedal carelessly. In general, the engine condition and gear shifting shall be controlled by controlling the throttle deceleration. This not only avoids overheating of the braking system caused by frequent braking, but also brings convenience for fast speed increase of the automatic feeding mixer.

在自動上料攪拌車作業時，特別是在鏟挖作業時，應在油門穩定情況下，用循環扳動起升和轉斗操縱桿的方法使鏟斗鏟滿物料。起升和轉斗操縱杠的循環扳動就是所說的“勤”。這個過程非常重要，對耗油量的影響很大。

During the operation of the automatic feeding mixer, especially the shoveling operation, the bucket shall be filled with materials by cyclically pulling the lifting and bucket turning control levers under the condition of stable accelerator. The cyclic pulling of the lifting and bucket turning control levers is called "diligence". This process is very important and has a great impact on fuel consumption.

協調就是起升和轉斗操縱杠有機的配合。自動上料攪拌車一般的鏟挖過程首先是將鏟斗平放在地面，平穩地駛向料堆。在鏟斗平行鏟往料堆遇阻力時，應遵循先起臂后收斗的原則。這樣可以有效地避免鏟斗底部受到阻力，從而能夠充分發揮大的掘起力。

Coordination is the organic cooperation between the lifting and bucket control rods. The general shovel digging process of the automatic loading mixer is to place the bucket flat on the ground and drive steadily to the material pile. When the bucket is parallel to the material pile and meets resistance, the principle of lifting the boom first and then retracting the bucket shall be followed. This can effectively prevent the bucket bottom from being subjected to resistance, so as to give full play to the large digging force.

在自動上料攪拌車作業時注意什么？對于這個問題，我們已經完成了講解，更多的注意事項需要您慢慢去發現，歡迎來我們這里http://www.gifcare.com咨詢！

What should be paid attention to during the operation of the automatic feeding mixer? We have finished the explanation of this problem, and more precautions need to be found out slowly. Welcome to us http://www.gifcare.com consulting service